Skip to content

DuraChem® 200

Breathable, NFPA-Certified Hi-Vis FR apparel with proven multi-purpose protection.

DuraChem® 200 is multi-purpose, high-visibility FR apparel with added protection against Chemical, Biological, Arc Flash, Steam and Hot Water, and Molten Metal Splash hazards.

Kappler DuraChem 200 suits in yellow hi-vis and navy shown on three models

DuraChem® 200 — Certified, Data-Driven Protection

Certified to or compliant with seven key industry safety standards, DuraChem 200 helps simplify PPE selection and inventory with a multi-hazard apparel solution. From industrial applications to emergency response, DuraChem 200 is a proven workhorse with the data to back it up.

  • Flame Resistant – NFPA 2112 & ASTM F2733.
  • Chemical – NFPA 1990 (1992).
  • Biological – ASTM F1671 blood and viral test.
  • Hi-Vis – ANSI/ISEA 107 Type P, Class 3, plus compliant with OSHA Roadside Emergency Response requirements. Does not apply to Navy fabric.
  • Arc Flash – NFPA 70E & ASTM F1891.
  • Molten Metal Splash – ASTM F955.
  • Tested Against Steam and Hot Water – University of Alberta (CAN/CSGB 155.20).

DuraChem® 200 Chemical Test Data

Total Chemicals Tested: 88

Sources for all chemical test data are independent laboratories. All tests were performed under laboratory conditions and not under actual use conditions. Tests were performed on material samples, not actual garments. All chemicals tested at 95% and 75° F unless otherwise specified.

All chemical test data shown is “permeation” based on ASTM F739, unless noted as “LIQUID PENETRATION” based on ASTM F903/F1671. Results displayed are in minutes. Select chemicals based on permeation when liquid and vapor protection is required. Select penetration when only liquid protection is required.

Chemical Name CAS Results (minutes)