| Chemical | Frontline 300 |
|---|---|
| Acetone | >480 |
| Acetonitrile | >480 |
| Carbon Disulfide | >480 |
| Dichloromethane | 10 |
| Diethylamine | >480 |
| Dimethylformamide | >480 |
| Ethyl Acetate | >480 |
| n-Hexane | >480 |
| Methyl Alcohol | >480 |
| Nitrobenzene | >480 |
| Sodium Hydroxide | >480 |
| Sulfuric Acid | >480 |
| Tetrachloroethylene | >480 |
| Tetrahydrofuran | >480 |
| Toluene | >480 |
| Gases | Frontline 300 |
|---|---|
| Ammonia Gas | >480 |
| 1,3 Butadiene | >480 |
| Chlorine Gas | >480 |
| Ethylene Oxide Gas | >480 |
| Chemical | Frontline 300 |
|---|---|
| Benzene | >480 |
| Diesel Fuel | >480 |
| Diethylethanolamine | >480 |
| Gasoline | >480 |
| Hydrofluoric acid (48%) | >480 |
| Kerosene | >480 |
| Methanol | >480 |
Frontline® 300 has been tested for thermal protective performance (TPP) in accordance with ISO 17492, Clothing for Protection Against Heat and Flame.
Frontline 300 showed a TPP value of 16.
Frontline 300 meets the requirements for flame resistance in accordance with ASTM F1358.
Frontline 300 meets the requirements for flame resistance in accordance with ASTM 6413.
Note: Sources for all chemical test data are independent laboratories. All tests were performed under laboratory conditions and not under actual use conditions. Tests were performed on material samples, not actual garments. All chemicals tested at 95% and 75° F except Sodium Hydroxide, tested at 50%.
Warning: There are uses, environments and chemicals for which these garments and/or fabrics are unsuitable. It is the responsibility of the user to review available data and verify that the garment and/or fabric is appropriate for the intended use and meets all specified government and/or industry standards.
Caution: Do not use for fire fighting protection. This garment is designed for escape purposes only. Avoid open flame or intense heat.