|Ethylene Oxide Gas||NT|
|Hydrogen Chloride Gas||NT|
|Methyl Chloride Gas||NT|
|Grab Tensile Strength MD* ASTM D751 (lbs/N)||52 / 231|
|Grab Tensile Strength CD* ASTM D751 (lbs/N)||39 / 173|
|Tear Resistance Trapezoid Method MD* ASTM D751(lbs/N)||22.9 / 101.8|
|Tear Resistance Trapezoid Method CD* ASTM D751(lbs/N)||9.6 / 42.7|
|Ball Burst ASTM D3787 (lbs/N)||43 / 191|
*MD - Machine Direction
*CD - Cross Direction
Note: Sources for all chemical test data are independent laboratories. All tests were performed under laboratory conditions and not under actual use conditions. Tests were performed on material samples, not actual garments. All chemicals tested at 95% and 75° F except Sodium Hydroxide, tested at 50%.
Note: These tests were performed in accordance with ASTM standards by independent laboratories. This data is derived from tests performed on material samples only, not finished garments.
Warning: This information is based on technical data that Kappler believes to be reliable. It is subject to revision as additional knowledge and experience are gained. The website will contain Kappler’s most up-to-date product information, and customers who receive pamphlets, brochures or other literature should be aware that such “hard copy” information may not be as current as the information on Kappler’s website. Customers also should recognize that there are uses, environments and chemicals for which Kappler products, garments and/or fabrics are unsuitable. It is the responsibility of the user to review available data and verify that the product, garment and/or fabric is appropriate for the intended use and meets all specified government and/or industry standards. Also, the customer should review all available information on the website to understand the uses – and limitations – on ALL products, garments and fabrics which Kappler makes available.